Data sheets
Wheel Load Scales
Wheel Load Strip Sensor
Processing Units
-
Processing unit EC 100
-
Processing Unit EC 120
-
Processing Software EC 200
Accessories
Technical Reports
Influence of the Gradient of the Weighing Site
-
The formulas for the dependence between indicated weight and the gradient of the weighing site are deduced and presented in the form of a graph.
General Guide for accurate weighing with portable scales
-
The possible sources of error are listed and hints are given how to increase the over all accuracy of the weighing result.
Sources of Error in Dynamic Weight Measurement
-
This is an article written for the Traffic Technology International magazine in 1997.
Evaluation of Factors Affecting WIM System Accuracy
-
This paper was presented at the second COST 323 WIM conference in Lisbon 1998.
Efficient Weight Enforcement with HAENNI Scales
-
This paper covers all political, legal, technical and practical issues of weight enforcment.
About HAENNI products
Certificates
Advertising
-
Advertising
-
Software
EC 200
-
The EC 200 is a multifunctional processing software with support for HAENNI wheel load scales and weighing sensors.
EC DATA
-
Data transmission program for EC 100 and EC 110.
WebServer
-
The HAENNI WebServer provides an easy programming interface to integrate HAENNI devices into your custom Windows® applicaton.
Calibration WL 104
-
Primary Indication for WL 104 with higher resolution (1 kg) for calibration purposes.
Calibration WL 108
-
Secondary Indication for WL 108 with higher resolution (1 kg) for calibration purposes.
Device driver for connecting cable
-
Connecting cables E 6913.x and E 6916.x are used with WL 103, WL 110 and EC 100.
Device driver for Interface Box
-
Interface Box E 9021.0 is used with WL 104.
ServiceSuite
-
Service Tool for WL 104, WL 108 and WL 400.